Dry Magic Core Bit Hex shaft for drill1/2″

Weha Vacuum Brazed Dry Magic Hex Head Non Core Drill Bits for Ceramic, Porcelain, Granite, Marble, Engineered Stone, Quartz, Landscape Stone, all natural Stones

Weha 1/2″ 12mm Dry Magic Vacuum Brazed Hex Head Non Core Bits are made to drill in ceramic, porcelain, granite, marble, quartz, and all natural and engineered stones.

These vacuum brazed drill bits are made to be used on Cordless and Electric Drills. The shaft is hexagon shaped to fit all cordless and electric drills. This keeps the diamond drill bit from spinning while drilling.

The Dry Magic Hex Head Core Bits can be used wet or dry and can be run from 700-6,000 rpm.

Weha’s patented Vacuum Brazed II technology allows the diamonds to drill faster and last longer than other vacuum brazed core bits.

Weha Dry Magic dry diamond core bits can all be used wet

The Dry Magic core drill bits will leave ceramic, porcelain, granite, marble, and all stone with a clean, chip free hole without any chips or blowouts around the hole.

The Dry Magic Hex Head Non Core Bit will drill a hole without leaving a core. This is really important when only drilling into the material without going all the way through. This is great for setting anchors, clips, screws, etc withpolyestersandepoxyglues.

Other available sizes of the Weha Dry Magic Hex Head Diamond Core Drill Bits:

1/4″ 6mm diamond core drill bit

5/16 8mm diamond core drill bit

3/8″ 10mm diamond core drill bit

9/16″ 14mm diamond core drill bit

Weha Dry Magic Non Core Bit Specifications:

Total Length: 3 1/8″ (80mm)

Hex Shaft: 1 1/2″ (40mm)

CNC TOOLING