Hager 040784 4601 CVR 36" x 84" US32D (REV 3). Satin Stainless Steel

Projection

• 3″ (76mm) in undogged position
• 2-5/8″ (67mm) in dogged position

Maximum Door Height

• 7′ (2134mm) – Standard
• 8′ (2438mm) – Optional

Cover

Stainless steel, zinc

Trim

Archer, August, William or Withnell lever with escutcheon trim

Door Thickness

1-3/4″ (44mm) – Standard

Door Width

• 36″ (914mm) field sizeable to 30″ (762mm) panic-rated door
• 48″ (1219mm) field sizeable to 36″ (914mm) panic- rated door

Strikes

• Stainless steel
• Mortised into aluminum frame

Fasteners

• Wood and machine screws
• Thru-bolts

Stile Width

• 2-1/8″ (54mm) minimum stile width required
• All stile widths are measured from door edge

Latchbolt Type

• Top – 1/2″ (13mm) throw, stainless steel
• Bottom – 1/2″ (13mm) throw, held retracted during door swing, stainless steel

DOOR WIDTH in. – EXIT DEVICE

36

Cover Tube

Aluminum

ELECTRICS – EXITS

NOT APPLICABLE

Push Bar

OPTIONAL Photoluminescent push bar cover available

ACCESSORIES – EXITS

NOT APPLICABLE

FINISHES – EXITS

US32D – SATIN STAINLESS STEEL

DOOR HEIGHT in. – EXIT DEVICE

84

End Caps

Zinc (Flush end cap standard)

Product Overview 4600 Series Grade 1 Concealed Vertical Rod Exit Device
Applications:
Aluminum Storefront Only
Certifications:

• ANSI/BHMA A156.3_2014 Grade 1
• UL305 Listed for Panic Hardware

Finishes:

• US26D and US32D
• US3, US4, US10B US26, BLK – available at extended lead times
• Trim is not available in US32D
• Anti-Microbial available with US26D and US32D

Functions:

• 01 – Exit Only (device)
• 02 – Dummy, pull when device is dogged down (46DT)
• 03 – Night Latch, key retracts latch bolt (46NL)
• 08 – Cylindrical Escutcheon, key locks or unlocks lever (46CE)
• 14 – Blank Escutcheon, always operable (passage) (46BE)

Notes:

• Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
• Recommended to be used on appropriately reinforced doors
• Available in Less Bottom Rod and Electrified versions also

Warranty:
Lifetime
Dogging:

• Hex dogging feature standard on panic-rated labeled doors
• Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required.

Notes:

• Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
• Recommended to be used on appropriately reinforced doors
• Available in Less Bottom Rod and Electrified versions also

Rod Length:

• Rods for 7 ft (2134mm) door – Standard
• Rods for 8 ft (2438mm) and 10 ft (3048mm) doors – Optional
• Door height of 7 ft (2134mm) requires 33-1/2″ (851mm) top rod length
• Door height of 8 ft (2438mm) requires 45-1/2″ (1156mm) top rod length