Titebond All Purpose Construction Adhesive10 Oz. Cartridge

3451

Titebond Solvent-Based All Purpose Construction Adhesive is a versatile formula designed for general purpose interior and exterior applications that bonds common building materials. It is highly water-resistant and offers a longer working time for precise assembly while remaining permanently flexible.

FEATURES & BENEFITS

• RECOMMENDED FOR:INTERIOR AND EXTERIOR CONSTRUCTION, REMODELING & REPAIR PROJECTS
• IDEAL FOR INTERIOR AND EXTERIOR PROJECTS
• WATER-RESISTANT
• LONG WORKING TIME
• COMPATIBLE MATERIALS:COMMON BUILDING MATERIALS INCLUDING WOOD, PANELING, DRYWALL, CERAMIC TILE, METAL, CONCRETE, CONCRETE BLOCK, FOAMBOARD AND TUB SURROUNDS.
• SOLVENT-BASED
• FOAMBOARD & PLASTICS
• EXTREMELY VERSATILE

APPLICATION GUIDELINES

APPLICATION TEMPERATURE:
0F to 100F

SERVICE TEMPERATURE RANGE:
-20F to 120F

WORKING TIME:
Approximately 10-20 minutes for a 1/4″ bead

PREP:
Surfaces must be clean and free of any material that may prevent adequate adhesion.

APPLICATION:
Cut tip on slant for 1/4 to 3/8 bead. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead.Paneling or foam:Apply 1/4 bead around perimeter 1 from edge and two zigzag beads in middle.Framing members:Apply directly to studs. Press materials firmly together with a slight twisting motion. Nail as needed. For drywall, use fasteners in accordance with local building standards.Note:For large panels, bracing may be required until adhesive dries.

CLEANUP:
Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendors precautions. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.

LIMITATIONS:
Not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other thin non-porous surfaces, you must first “rough up” the area by sanding or scraping. Do not adhere one non-porous material to another since this will slow or prevent drying. Do not apply to polystyrene foam if the temperature is above 90F.

PHYSICAL PROPERTIES

TYPE:Synthetic elastomeric polymer

STATE:Medium-viscosity mastic

COLOR:Tan

SOLIDS:74%

VISCOSITY:130,000 cps

VOC:> 300 g/L

FLASHPOINT:< 0F

FREEZE / THAW STABILITY:Will not freeze

STORAGE LIFE:18 months in tightly closed containers at 75F

ODOR:Alcohol-like
Lighting & Ceiling Fans